1. |
Input Voltage |
: 230 VAC Single Phase Input range 180 – 264 VAC |
2. |
Frequency |
: 47-63 Hz |
3. |
Input |
: Through 3 core cable and 15 A, 3 pin plug provided on the side of Battery Charger |
4. |
Battery Charger ON/OFF Switch |
: 16 Amp rating Rocker Switch with Neon Indicating lamp Provided on the Front Panel. |
5. |
Display
Voltmeter
Current Meter |
: Display for each channel selectable by rotary switch.
3 ½ Digit DPM for displaying Battery / Charger Voltage (in Volts). Accuracy 0.2V +/- 2 Digits |
3 ½ Digit DPM for displaying charging current (in Amp). Accuracy 0.2A +/- 2 Digits |
|
6. |
No. of Channels/Charging Port |
: 6 (Maximum Capacity 15A per Channel) |
Specifications for each Channel/Charging Port |
8. |
Battery Charging Voltage |
: 13.6 +/- 0.2V( Charge Complete Mode )
: 14.6 +/- 0.2V( Charging Mode ) |
Change over from Charging Mode to Charging Complete Mode when the charging current reduces to < 1% AH. |
9. |
Charging Current |
: 15 Amps max. |
10. |
Charging Current Adjustment |
: Maximum charging current can be Adjusted from 6A to 15A with adjustment on the front panel. |
11. |
Battery Switch |
: Rocker switch 16A. |
12. |
Protections |
: Battery Charger protected against Over Load, Short Circuit and Battery reverse connection. |
13. |
Battery Connector |
: TB56 Series 2 Position, 1 each for +ve & -ve. |
14. |
Indications |
: Green LED for Charging Complete.
: Yellow LED for Charging.
: Red LED for Charger fail.
: Red LED to indicate Reverse Battery Connection. |
15. |
Switches and Controls |
: Rocker Switch for Connecting Battery to Charger
: Potentiometer for adjusting Current Limit. |
16. |
Enclosure |
: IP 20. |
14. |
Mounting |
: Provision for Table top and wall / Panel mounting. |
15. |
Size |
: 490(W) x 380(H) x 350(D) MM |
16. |
Weight |
: 20 Kg. |
|
|
Specifications subject to change without notice. |